Redmi Pad Stock ROM Firmware (Flash File) (yunluo)

Xiaomi Hub Team | December 17, 2022 | redmi | No Comments

Table of Contents

You can now get the Redmi Pad Stock ROM Firmware from the link provided below. You can use this firmware to solve all software issues on your Redmi Pad, such as hang-on Logo, FRP lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash, and so on.

This page contains a direct link to the official Redmi Pad Stock ROM Firmware (flash file) download page. The Firmware is delivered in the form of a zip file that contains the original Firmware, Flash Tool, Driver, and How-to Flash Manual.

Note:

make a backup before the Process
it will erase all your data Including Internal Storage

Firmware Information

Device Name – Redmi Pad
ROM Type – Full ROM
SoC – Mediatek
OS – Android 12
Size – 3-6GB
Password – Null
Root Access – No
Region –
Firmware Version – V13.1.4.0.SLYMIXM

Downloads Links for Redmi Pad Stock ROM Firmware:

V13.1.2.0.SLYINXM | 12.0 IND: Download
V13.1.4.0.SLYMIXM | 12.0 GLO: Download

EEA:

V13.1.3.0.SLYEUXM | 12.0 : Download
V13.1.2.0.SLYEUXM | 12.0 : Download

Russia:

V13.1.5.0.SLYRUXM | 12.0: Download
V13.1.2.0.SLYRUXM | 12.0: Download

TAIWAN:

V13.1.1.0.SLYTWXM | 12.0: Download

China:

V13.1.2.0.SLYCNXM | 12.0: Download

How to Flash Redmi Pad Stock ROM Firmware Via MI Flash:

How to use Xiaomi MI Flash Tool

How to Flash Xiaomi Redmi Pad Via SP Flash tool:

unpack downloaded Firmware using 7zip
Now You have scatter firmware
Install Mediatek Vcom driver on Your computer
disable SLA Authentication (if not disabled You will face a BROM error or flash tool Require a Authorized account/ID)
Download & Extract smartphone flash tools on your computer
from the flash tool folder Run flash_tool.exe
set connection like below image (option/connection)
Go to Download tab Click Scatter and Load Scatter File from ROM folder
Repeat Process and load DA and Auth file too
from drop down Select ‘Download only‘
Click ‘Download’
turn Phone OFF, Now together Press Volume up + down key & Insert USB, Once Phone detected Immediate Release key (make sure your phone stable in device manager)
You will see a Yellow flashing bar with flashing Process. once done, unplug device and switch it ON

Method 2:

Install MTK & usbdk driver on your pc
Run rom2box Go to Mediatek/Firmware flasher & open dedicated GUI
turn Phone OFF, Now together Press Volume up + down key & Insert USB, Once Phone detected Immediate Release key
On ROM2box Go to Partition Flasher, load all files one by one From extracted firmware
Now Click Flash button, wait until success, disconnect device, reconnect, once charging started, disconnect & Restart..