Redmi Note 10 5G Stock ROM Firmware (Flash File)

Xiaomi Hub Team | September 11, 2022 | redmi | No Comments

Table of Contents

You can now get the Redmi Note 10 5G Stock ROM Firmware from the link provided below. You can use this firmware to solve all software issues on your Redmi Note 10 5G, such as hang-on Logo, FRP lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash, and so on.

This page contains a direct link to the official Redmi Note 10 5G Stock ROM Firmware (flash file) download page. The Firmware is delivered in the form of a zip file that contains the original Firmware, Flash Tool, Driver, and How-to Flash Manual.

Note:

make a backup before the Process
it will erase all your data Including Internal Storage

Firmware Information

Device Name – Redmi Note 10 5G
ROM Type – Full ROM
SoC – Mediatek MT6833
OS – Android 11
Size – 4.4 GB
Password – Null
Root Access – No
Region – Indonesia
Firmware Version – V12.0.9.0.RKSEUXM

Downloads Links for Redmi Note 10 5G Stock ROM Firmware:

EDL Firmware:
full firmware to Reinstall board software (only for dead and bootloop devices)

V12.5.1.0.RKSINXM INDIA Stable: Download
V12.5.4.0.RKSEUXM | 11.0 EEA Stable: Download
V12.0.2.0.RKSTRXM turkey Stable: Download
V12.5.2.0.RKSTWXM | 11.0 Taiwan Stable: Download
V12.0.3.0.RKSRUXM Russia Stable: Download
V12.0.3.0.RKSIDXM Indonesia Stable: Download

Global:

V13.0.3.0.SKSMIXM | 12.0: Download
V12.5.3.0.RKSMIXM | 12.0: Download

How to Flash Redmi Note 10 5G Stock ROM Firmware Via MI Flash:

How to use Xiaomi MI Flash Tool

How to Install Stock Firmware on Redmi Note 10 5G:

First disable SLA Authentication (if not disabled you will get a BROM error or MI flash tool Require a authorized Mi account)
Extract downloaded stock firmware..
Install Mediatek Vcom driver on Your computer.
Download & Extract smartphone Flash tools on your computer
From the flash tool folder Run Flash_tool.exe
Go to Download tab Click Scatter and Load Scatter File from ROM Folder
Select Download only. Click Download & Connect Your switched off Phone.
You can see Flashing Process On Screen. after Complete unplug & switch it on

How to Flash Xiaomi Redmi Note 10 5G Via Mi Flash tool:

Download and Install usb driver on computer
Download Extract & Install MI Flash
Now Run MI Flash Click Refresh
select extracted Fastboot ROM folder
Reboot Phone to bootloader (or EDL Mod) and connect it to computer
Click Start and wait until success. once done, disconnect device & switch it ON