Redmi 10A Stock ROM Firmware (Flash File)

Xiaomi Hub Team | September 6, 2022 | redmi | No Comments

Table of Contents

You can now get the Redmi 10A Stock ROM Firmware from the link provided below. You can use this firmware to solve all software issues on your Redmi 10A, such as hang-on Logo, FRP lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash, and so on.

This page contains a direct link to the official Redmi 10A Stock ROM Firmware (flash file) download page. The Firmware is delivered in the form of a zip file that contains the original Firmware, Flash Tool, Driver, and How-to Flash Manual.

Note:

make a backup before the Process
it will erase all your data Including Internal Storage

Firmware Information

Device Name – Redmi 10A
ROM Type – Full ROM
SoC – Mediatek
OS – Android 12
Size – 2-6 GB
Password – Null
Root Access – No
Region –
Firmware Version – dandelion_c3l2_images_V12.5.4.0.RCZCNXM_20220315.0000.00_11.0

Downloads Links for Redmi 10A Stock ROM Firmware:

EDL Firmware:
full firmware to Reinstall board software (only for dead and bootloop devices)

V12.5.5.0.RCZINXM | 11.0 IN: Download
V12.5.8.0.RCZMIXM | 11.0 GLO: Download
V12.5.2.0.RCZTWXM | 11.0 TW: Download
V12.5.4.0.RCZCNXM China Scatter: Download

EEA:

V12.5.7.0.RCZEUXM | 11.0: Download
V12.5.2.0.RCZEUXM | 11.0: Download

How to Flash Redmi 10A Stock ROM Firmware Via MI Flash:

How to use Xiaomi MI Flash Tool

How to Flash Xiaomi Redmi 10A Via SP Flash tool:

Extract Downloaded Stock Firmware..
Install the Mediatek Vcom driver on Your computer
Disable SLA authentication
Download & Extract SP Flash tools
From the flash tool folder, Run flash_tool.exe
Go to the Download tab Click Scatter and Load Scatter File from ROM Folder
follow the same and load the DA and Auth file
Select Download Only from the dropdown.
Click Download & Connect Your Switched-off Phone to a computer by using a USB cable (USB + volume up + volume down key) if no USB device then you have to do a test point
You can see a yellow flashing bar, once done it will turn green, disconnect the device and switch it ON.