Poco M5s Stock ROM Firmware (Flash File)

Poco M5s Stock ROM Firmware (Flash File)

You can now get the Poco M5s Stock ROM Firmware from the link provided below. You can use this firmware to solve all software issues on your Poco M5s, such as hang-on Logo, FRP lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash, and so on.

This page contains a direct link to the official Poco M5s Stock ROM Firmware (flash file) download page. The Firmware is delivered in the form of a zip file that contains the original Firmware, Flash Tool, Driver, and How-to Flash Manual.

Note:

  • make a backup before the Process
  • it will erase all your data Including Internal Storage

Firmware Information

  • Device Name – Poco M5s
  • ROM Type – Full ROM
  • SoC – Mediatek
  • OS – Android 11
  • Size – 5.59 GB
  • Password – Null
  • Root Access – No
  • Region –¬†
  • Firmware Version – V13.0.8.0.SKLMIXM

Downloads Links for Poco M5s Stock ROM Firmware:

Available Firmware:

EEA:

INDIAN ROM:

GLOBAL ROM:

Russian ROM:

TAIWAN ROM:

Indonesian ROM:

How to Flash Poco M5s Stock ROM Firmware Via MI Flash:

How to use Xiaomi MI Flash Tool

How to Flash Poco M5s Via SP Flash tool:

  • unpack downloaded Firmware¬†using 7zip
  • Now You have scatter firmware
  • Install Mediatek Vcom¬†driver¬†on¬†Your computer
  • disable SLA Authentication¬†by following¬†this Guide¬†(if not disabled You will face a BROM error or flash tool Require a Authorized account/ID)
  • Download & Extract smartphone flash¬†tools¬†on your computer
  • from the flash tool folder¬†Run flash_tool.exe
  • set connection (option/connection)
  • Go to¬†Download¬†tab¬†Click Scatter¬†and¬†Load Scatter File¬†from¬†ROM folder
  • Repeat Process and load DA and Auth file too
  • from drop down Select ‚ÄėDownload only‚Äė
  • Click ‚ÄėDownload‚Äô
  • turn Phone OFF, Now together¬†Press Volume up + down key & Insert USB, Once Phone detected Immediate Release key¬†(make sure your phone stable in device manager)
  • You will see a Yellow flashing bar with flashing Process. once done, unplug device and switch it ON

Related

Leave a Reply