Poco M3 Pro Stock ROM Firmware (Flash File) (CAMELLIAN)

Poco M3 Pro Stock ROM Firmware (Flash File) (CAMELLIAN)

You can now get the Poco M3 Pro Stock ROM Firmware from the link provided below. You can use this firmware to solve all software issues on your Poco M3 Pro, such as hang-on Logo, FRP lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash, and so on.

This page contains a direct link to the official Poco M3 Pro Stock ROM Firmware (flash file) download page. The Firmware is delivered in the form of a zip file that contains the original Firmware, Flash Tool, Driver, and How-to Flash Manual.

Note:

  • make a backup before the Process
  • it will erase all your data Including Internal Storage

Firmware Information

  • Device Name – Poco M3 Pro
  • ROM Type – Full ROM
  • SoC – Mediatek MT6833
  • OS – Android 11
  • Size – 5.59 GB
  • Password – Null
  • Root Access – No
  • Region – All
  • Firmware Version – V12.5.4.0.RKSTWXM

Downloads Links for Poco M3 Pro Stock ROM Firmware:

Available Firmware:

Russia:

How to Flash Poco M3 Pro Stock ROM Firmware Via MI Flash:

How to use Xiaomi MI Flash Tool

How to Install Stock Firmware on Xiaomi Poco M3 Pro:

  • First Disable SLA Authentication by following this Guide (if not disabled You will get a BROM error or MI flash tool Require a Authorized Mi account)
  • Extract downloaded stock firmware..
  • Install Mediatek Vcom driver on Your computer.
  • Download & Extract smartphone Flash tools on your computer
  • From the flash tool folder Run Flash_tool.exe
  • Go to Download tab Click Scatter and Load Scatter File from ROM Folder
  • Select Download onlyClick Download & Connect Your switched off Phone.
  • You can see Flashing Process On screen. once done, unplug device & switch it ON

How to Flash Xiaomi Poco M3 Pro Via Mi Flash tool:

  • Download and Install usb driver on computer
  • Download Extract & Install MI Flash
  • Now Run MI Flash Click Refresh
  • Select Extracted Fastboot ROM folder
  • Reboot Phone to bootloader (or EDL Mod) and connect it to computer
  • Click Start and wait until success. once done, disconnect device & switch it ON

Related

Leave a Reply